电子电路图,C51网

摇摇棒程序 用普通的51单片机控制16个LED，定时切换换面，同时做出动画效果-Shaking his stick with the ordinary procedures of 51 control 16 single-chip LED, switched from time to time for face, at the same time to make animation

这是使用MAX3100和89S52单片机的红外放射原理图和用C语言写的程序代码。-This is the use of MAX3100 and MCU 89S52 Schematic infrared radiation and the use of C language to write the program code.

台湾盛群单片机电磁炉代码和PCB图是两位数码-Taiwan Holtek Singlechip电磁炉code and PCB map is two digital

井下人员定位系统的单片机程序数据采集并发送到上位机-Underground staff Singlechip positioning system data collection procedures sent to PC

一款为国内某大厂，使用NEC单片机开发的，已量产，出货200K以上的微波炉控制器完整的汇编语言程序。-section of a certain domestic companies, the use of NEC MCU development, mass production, output above 200 K in the microwave controller integrity of the assembly language program.

用芯片sht10 测量温湿度的C程序,51单片机系列的-temperature,and humidity measure

USB读SD卡的读卡器代码。已经在单片机编译过。 51+PDIUSBD12+SD卡作USB读卡器程序里用了OO的代码，用IDE-USB那个例程改的。这个程序里，已经把存储设备的驱动独立出来了，也就是只要改动存储设备的扇区读写驱动，就可以把存储设备变成U盘了-Reading SD card reader USB code. SCM has been compiled.…

89s51单片机做的循迹小车-89s51 MCU do backtracking Trolley

GPS接收机模块的解码,采用51系列单片机编程，从接收码中接收经度和纬度。-globe positoning system mode

基于ATMEGA48单片机的无刷电机控制程序，基于HALL传感器-ATMEGA48 MCU-based BLDC motor control program, based on the HALL sensor